Plating Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend plating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces. Typically, the product being coated is immersed in molten metal or an electrolytic solution.

On the job, you would:

Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.

Important Qualities

Computer skills. Metal and plastic machine workers must be able to use programmable devices, computers, and robots on the factory floor.

Mechanical skills. These workers must be comfortable with machines and have a good understanding of how all the parts work.

Physical stamina. Metal and plastic machine workers must be able to stand for long periods and do repetitive tasks.

Physical strength. Metal and plastic machine workers must be able to secure and tighten heavy fixtures into place.

Personality

A3	Your Strengths	Importance	Characteristics of this Career
		89%	Attention to Detail - Job requires being careful about detail and thorough in completing work tasks.
		81%	Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations.
		77%	Cooperation - Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
		74%	Achievement/Effort - Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
		72%	Integrity - Job requires being honest and ethical.
		71%	Self-Control - Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
		70%	Independence - Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.
		69%	Stress Tolerance - Job requires accepting criticism and dealing calmly and effectively with high-stress situations.
		69%	Adaptability/Flexibility - Job requires being open to change (positive or negative) and to considerable variety in the workplace.
		66%	Persistence - Job requires persistence in the face of obstacles.
		65%	Social Orientation - Job requires preferring to work with others rather than alone, and being personally connected with others on the job.
		65%	Analytical Thinking - Job requires analyzing information and using logic to address work-related issues and problems.
		65%	Leadership - Job requires a willingness to lead, take charge, and offer opinions and direction.
		63%	Initiative - Job requires a willingness to take on responsibilities and challenges.
		61%	Innovation - Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.
		56%	Concern for Others - Job requires being sensitive to others' needs and feelings and being understanding and helpful on the job.

A3	Your Strengths	Importance	Strengths
		100%	Realistic - Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.

A3	Your Strengths	Importance	Values of the Work Environment
		61%	Support - Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
		56%	Relationships - Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service.

Aptitude

A3	Your Strengths	Importance	Abilities \| Cognitive, Physical, Personality
		60%	Near Vision - The ability to see details at close range (within a few feet of the observer).
		60%	Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
		56%	Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
		56%	Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
		56%	Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
		56%	Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
		53%	Multilimb Coordination - The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
		53%	Oral Expression - The ability to communicate information and ideas in speaking so others will understand.
		53%	Speech Clarity - The ability to speak clearly so others can understand you.

Job Details

Responsibilities

Inspect finishes of workpieces or finished products.

Immerse objects or workpieces in cleaning or coating solutions.

Apply protective or decorative finishes to workpieces or products.

Immerse objects or workpieces in cleaning or coating solutions.

Operate painting or coating equipment.

Feed materials or products into or through equipment.

Conduct test runs of production equipment.

Operate cranes, hoists, or other moving or lifting equipment.

Record operational or production data.

Operate painting or coating equipment.

Remove products or workpieces from production equipment.

Monitor equipment operation to ensure proper functioning.

Operate painting or coating equipment.

Load materials into production equipment.

Position containers to receive materials or workpieces.

Clean production equipment.

Maintain production or processing equipment.

Lubricate production equipment.

Clean production equipment.

Maintain production or processing equipment.

Determine metal or plastic production methods.

Immerse objects or workpieces in cleaning or coating solutions.

Measure dimensions of completed products or workpieces to verify conformance to specifications.

Adjust flow of electricity to tools or production equipment.

Clean workpieces or finished products.

Measure dimensions of completed products or workpieces to verify conformance to specifications.

Measure ingredients or substances to be used in production processes.

Immerse objects or workpieces in cleaning or coating solutions.

Measure materials to mark reference points, cutting lines, or other indicators.

Mix substances to create chemical solutions.

Adjust equipment controls to regulate flow of production materials or products.

Load items into ovens or furnaces.

Apply protective or decorative finishes to workpieces or products.

Study blueprints or other instructions to determine equipment setup requirements.

Apply protective or decorative finishes to workpieces or products.

Mount materials or workpieces onto production equipment.

Set equipment guides, stops, spacers, or other fixtures.

Heat material or workpieces to prepare for or complete production.

Replace worn equipment components.

Connect supply lines to production equipment or tools.

Trim excess material from workpieces.

Operate grinding equipment.

Clean workpieces or finished products.

Install mechanical components in production equipment.

Clean workpieces or finished products.

Cut industrial materials in preparation for fabrication or processing.

A3	Your Strengths	Importance	Attributes & Percentage of Time Spent
		99%	Time Pressure - How often does this job require the worker to meet strict deadlines?
		95%	Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets - How much does this job require wearing common protective or safety equipment such as safety shoes, glasses, gloves, hard hats or life jackets?
		93%	Exposed to Contaminants - How often does this job require working exposed to contaminants (such as pollutants, gases, dust or odors)?
		90%	Face-to-Face Discussions - How often do you have to have face-to-face discussions with individuals or teams in this job?
		89%	Sounds, Noise Levels Are Distracting or Uncomfortable - How often does this job require working exposed to sounds and noise levels that are distracting or uncomfortable?
		85%	Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls - How much does this job require using your hands to handle, control, or feel objects, tools or controls?
		82%	Spend Time Standing - How much does this job require standing?
		81%	Importance of Being Exact or Accurate - How important is being very exact or highly accurate in performing this job?
		80%	Exposed to Hazardous Conditions - How often does this job require exposure to hazardous conditions?
		79%	Work With Work Group or Team - How important is it to work with others in a group or team in this job?
		78%	Indoors, Not Environmentally Controlled - How often does this job require working indoors in non-controlled environmental conditions (e.g., warehouse without heat)?
		77%	Responsibility for Outcomes and Results - How responsible is the worker for work outcomes and results of other workers?
		73%	Contact With Others - How much does this job require the worker to be in contact with others (face-to-face, by telephone, or otherwise) in order to perform it?
		73%	Freedom to Make Decisions - How much decision making freedom, without supervision, does the job offer?
		71%	Very Hot or Cold Temperatures - How often does this job require working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures?
		66%	Responsible for Others' Health and Safety - How much responsibility is there for the health and safety of others in this job?
		64%	Spend Time Walking and Running - How much does this job require walking and running?
		63%	Coordinate or Lead Others - How important is it to coordinate or lead others in accomplishing work activities in this job?
		62%	Importance of Repeating Same Tasks - How important is repeating the same physical activities (e.g., key entry) or mental activities (e.g., checking entries in a ledger) over and over, without stopping, to performing this job?
		62%	Spend Time Making Repetitive Motions - How much does this job require making repetitive motions?
		61%	Pace Determined by Speed of Equipment - How important is it to this job that the pace is determined by the speed of equipment or machinery? (This does not refer to keeping busy at all times on this job.)
		60%	Consequence of Error - How serious would the result usually be if the worker made a mistake that was not readily correctable?
		59%	Physical Proximity - To what extent does this job require the worker to perform job tasks in close physical proximity to other people?
		59%	Frequency of Decision Making - How frequently is the worker required to make decisions that affect other people, the financial resources, and/or the image and reputation of the organization?
		59%	Exposed to Minor Burns, Cuts, Bites, or Stings - How often does this job require exposure to minor burns, cuts, bites, or stings?
		56%	Exposed to Hazardous Equipment - How often does this job require exposure to hazardous equipment?
		55%	Structured versus Unstructured Work - To what extent is this job structured for the worker, rather than allowing the worker to determine tasks, priorities, and goals?
		67%	Duration of Typical Work Week - Number of hours typically worked in one week.

A3	Your Strengths	Importance	Tasks & Values
		83%	Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
		80%	Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
		78%	Monitoring Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
		76%	Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems.
		75%	Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
		75%	Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
		74%	Inspecting Equipment, Structures, or Materials - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
		71%	Judging the Qualities of Objects, Services, or People - Assessing the value, importance, or quality of things or people.
		69%	Getting Information - Observing, receiving, and otherwise obtaining information from all relevant sources.
		67%	Operating Vehicles, Mechanized Devices, or Equipment - Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or watercraft.
		66%	Training and Teaching Others - Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
		56%	Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
		56%	Thinking Creatively - Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
		56%	Updating and Using Relevant Knowledge - Keeping up-to-date technically and applying new knowledge to your job.
		53%	Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work.
		53%	Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
		52%	Processing Information - Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
		51%	Coaching and Developing Others - Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.

What Metal and Plastic Machine Workers Do

Metal and plastic machine workers monitor and adjust machines during operation.

Metal and plastic machine workers set up and operate equipment that cuts, shapes, and forms metal and plastic materials or pieces.

Duties

Metal and plastic machine workers typically do the following:

Set up and adjust machines according to blueprints
Monitor machines status to ensure proper functioning
Insert material into machines, either manually or using material handling equipment
Operate shaping and forming equipment, such as metal or plastic molding, casting, or coremaking machines
Operate stock removal metalworking machines, such as lathes or mills
Adjust machine settings for temperature, cycle times, and speed and feed rates
Remove finished products and document output in a database
Measure, test, and inspect finished workpieces according to blueprints
Observe and adjust or replace dull or damaged cutting tools

Metal and plastic machine workers operate equipment that creates the parts for consumer products. In general, these workers are separated into two groups: those who set up machines for operation and those who operate machines during production. However, many workers perform both tasks.

Although many workers both set up and operate machines, some specialize in being either a machine setter or a machine operator and tender.

Machine setters, or setup workers, prepare the machines before production, do test runs, and, if necessary, adjust and make minor repairs to the machinery before and during operation. Computer numerically controlled (CNC) setters upload computer control programs.

After installing the tools into a machine, setup workers often produce the initial batch of goods, inspect the products, and turn over the machine to an operator.

Machine operators and tenders monitor the machinery during production.

After a setter prepares a machine for production, an operator observes the machine and the products it makes. Operators may have to load the machine with materials for production or adjust machine speeds during production. They must periodically inspect the parts that a machine produces to ensure everything works properly, repairing equipment as needed. For example, the parts a machine produces may show defects if the cutting tool inside a machine becomes dull or damaged after extended use. When that happens, it is common for an operator to remove the worn tool and replace it with a new one produced by tool and die makers. Operators may fix minor problems themselves but may have an industrial machinery mechanic fix more serious problems.

Setters, operators, and tenders are usually identified by the type of machine they work with. Job duties generally vary with the size of the manufacturer and the type of machine being operated. Although some workers specialize in one or two types of machines, others are trained to set up or operate a variety of them. Automation often allows machine operators to control multiple machines at the same time.

In addition, production techniques, such as team-oriented “lean” manufacturing, require machine operators to rotate between different machines. Rotating assignments results in more varied work but also requires workers to have a range of skills.

The following are examples of types of metal and plastic machine workers:

Computer numerically controlled tool operators operate CNC equipment or robots to perform functions on metal or plastic workpieces.

Computer numerically controlled tool programmers develop computer programs to control the machining or processing of metal or plastic parts by automatic machine tools, equipment, or systems.

Cutting, punching, and press machine setters, operators, and tenders set up or operate machines to saw, cut, shear, notch, bend, or straighten metal or plastic materials.

Drilling and boring machine tool setters, operators, and tenders set up or operate drilling machines to drill, bore, mill, or countersink metal or plastic workpieces.

Extruding and drawing machine setters, operators, and tenders set up or operate machines to extrude (pull out) thermoplastic or metal materials in the form of tubes, rods, hoses, wire, bars, or structural shapes.

Forging machine setters, operators, and tenders set up or operate machines that shape or form metal or plastic into parts.

Foundry mold and coremakers make or form wax or sand cores or molds used in the production of metal castings in foundries.

Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders set up or operate grinding and related machine tools that remove excess material from surfaces, sharpen edges or corners, or buff or polish metal or plastic workpieces.

Heat-treating equipment setters, operators, and tenders set up or operate heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, soaking pits, or vacuum equipment, to temper, harden, anneal, or heat treat metal or plastic objects.

Lathe and turning machine tool setters, operators, and tenders set up or operate lathe and turning machines to turn, bore, thread, or form metal or plastic materials, such as bars, rods, and castings.

Metal-refining furnace operators and tenders operate or tend furnaces, such as gas, oil, coal, electric-arc or electric-induction, and oxygen furnaces. These furnaces may be used to melt and refine metal before casting.

Milling and planing machine setters, operators, and tenders set up or operate milling or planing machines to shape, groove, or profile metal or plastic workpieces.

Model makers set up and operate machines, such as milling and engraving machines, to make working models of metal or plastic objects. They may also use 3D printing technology.

Molding, coremaking, and casting machine setters, operators, and tenders set up or operate metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.

Multiple machine tool setters, operators, and tenders set up or operate two or more types of cutting or forming machine tool or robot.

Patternmakers lay out, machine, fit, and assemble castings and parts to metal or plastic foundry patterns and core molds.

Plating machine setters, operators, and tenders set up or operate plating machines and perform chemical checks for coating metal or plastic products with zinc, copper, nickel, or some other metal to protect or decorate surfaces.

Pourers and casters operate computer- or hand-controlled machines to pour and regulate the flow of molten metal into molds to produce castings or ingots.

Rolling machine setters, operators, and tenders set up or operate machines to roll steel or plastic or to flatten, temper, or reduce the thickness of materials.

Welding, soldering, and brazing machine setters, operators, and tenders (including workers who operate laser cutters or laser-beam machines) set up or operate welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies.

Work Environment

Metal and plastic machine workers held about 1.0 million jobs in 2022. Employment in the detailed occupations that make up metal and plastic machine workers was distributed as follows:

Cutting, punching, and press machine setters, operators, and tenders, metal and plastic	184,800
Computer numerically controlled tool operators	181,800
Molding, coremaking, and casting machine setters, operators, and tenders, metal and plastic	167,900
Multiple machine tool setters, operators, and tenders, metal and plastic	139,900
Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders, metal and plastic	75,000
Extruding and drawing machine setters, operators, and tenders, metal and plastic	64,300
Plating machine setters, operators, and tenders, metal and plastic	32,900
Welding, soldering, and brazing machine setters, operators, and tenders	32,900
Computer numerically controlled tool programmers	28,500
Rolling machine setters, operators, and tenders, metal and plastic	28,200
Metal-refining furnace operators and tenders	19,700
Lathe and turning machine tool setters, operators, and tenders, metal and plastic	19,700
Heat treating equipment setters, operators, and tenders, metal and plastic	16,000
Milling and planing machine setters, operators, and tenders, metal and plastic	15,700
Foundry mold and coremakers	11,500
Forging machine setters, operators, and tenders, metal and plastic	10,900
Drilling and boring machine tool setters, operators, and tenders, metal and plastic	6,600
Pourers and casters, metal	6,200
Model makers, metal and plastic	3,400
Patternmakers, metal and plastic	2,300

The largest employers of metal and plastic machine workers were as follows:

Fabricated metal product manufacturing	25%
Plastics and rubber products manufacturing	16
Transportation equipment manufacturing	13
Primary metal manufacturing	11
Machinery manufacturing	11

Injuries and Illnesses

These workers often operate powerful, high-speed machines that can be dangerous and must observe safety rules. Operators usually wear protective equipment, such as safety glasses, earplugs, and steel-toed boots, to guard against flying particles of metal or plastic, machine noise, and heavy objects, respectively.

Other required safety equipment varies by work setting and machine. For example, respirators are common for those in the plastics industry who work near materials that emit dangerous fumes or dust.

Welding, soldering, and brazing machine setters, operators, and tenders have one of the highest rates of injuries and illnesses of all occupations.

Work Schedules

Most metal and plastic machine workers are employed full time. Some work more than 40 hours per week. Because many manufacturers run their machinery for extended periods, evening and weekend work is also common.

Getting Started

Education:

49%

Less than a High School Diploma

47%

High School Diploma - or the equivalent (for example, GED)

How to Become a Metal or Plastic Machine Worker

Metal and plastic machine workers must be able to stand for long periods and perform repetitive work.

Metal and plastic workers typically need a high school diploma to enter the occupation and receive 1 year of on-the-job training. Computer numerically controlled (CNC) tool programmers typically need postsecondary education.

Education

Although metal and plastic machine workers typically need a high school diploma, CNC tool programmers usually need coursework beyond high school. Some community colleges and other schools offer courses and certificate programs in operating metal and plastics machines including CNC programming.

For metal and plastic machine workers, high school classes in computer programming, math, and vocational technology may be useful.

Training

Machine operator trainees usually begin by watching and helping experienced workers on the job. Under supervision, they may supply materials, start and stop the machines, or remove finished products. Then, they advance to operators’ more difficult tasks, such as adjusting feeds and speeds, replacing tools, and measuring finished products for conformance. Eventually, some operators develop the skills and experience to set up machines.

The complexity of the equipment usually determines the time required to become an operator. Some operators and tenders are trained on basic machine operations and functions in a few months. Others, such as CNC tool operators, may need training for up to 1 year.

Because of the prevalence of computerized machines in manufacturing, training on computer-aided design (CAD), computer-aided manufacturing (CAM), and CNC equipment may be helpful.

Licenses, Certifications, and Registrations

Certification can show competence and can be helpful for advancement. The National Institute for Metalworking Skills (NIMS) offers certification in numerous metalworking specializations.

Advancement

With skill and experience, workers may advance to positions that offer higher pay and more responsibility. It is common for machine operators to move into setup or machinery maintenance positions. Setup workers may become industrial machinery mechanics and maintenance workers, machinists, or tool and die makers.

Experienced workers with good communication and analytical skills may advance to supervisory positions.

Job Outlook

Overall employment of metal and plastic machine workers is projected to decline 6 percent from 2022 to 2032.

Despite declining employment, about 90,800 openings for metal and plastic machine workers are projected each year, on average, over the decade. All of those openings are expected to result from the need to replace workers who transfer to other occupations or exit the labor force, such as to retire.

Employment

Projected employment of metal and plastic machine workers varies by occupation (see table).

One of the most important factors influencing employment of these workers is the use of laborsaving machinery. Many firms are continuing to expand the use of technologies, such as computer numerically controlled (CNC) tools and robots, to improve quality and lower production costs. The use of CNC equipment requires CNC tool programmers instead of machine setters, operators, and tenders. Therefore, demand for most manual tool operators and tenders is likely to be reduced, while demand for CNC tool programmers is expected to be strong.

Additionally, the use of software to create digital and 3D-print prototypes may reduce the need for some of these workers, including patternmakers and model makers.

Employment of metal and plastic machine workers also is affected by the demand for the parts they produce. Both plastic and metal manufacturing industries face foreign competition that limits the orders for parts produced in this country. Changes in the cost of operations in the United States and abroad may encourage some manufacturers to bring back production that was previously sent offshore. However, new facilities in the United States will likely incorporate more automation technologies, requiring less labor overall.

Contacts for More Information

For more information about metal and plastic machine workers, including training and certification, visit

Fabricators & Manufacturers Association, International (FMA)

National Institute for Metalworking Skills (NIMS)

For information about manufacturing careers, machinery, and equipment, visit

Association for Manufacturing Technology (AMT)

National Tooling and Machining Association (NTMA)

Precision Machined Products Association (PMPA)

Precision Metalforming Association (PMA)

Occupational Requirements Survey

For a profile highlighting selected BLS data on occupational requirements, see

Cutting, punching, and press machine setters, operators, and tenders (PDF)

Similar Occupations

This table shows a list of occupations with job duties that are similar to those of metal and plastic machine workers.

Occupation	Job Duties	Entry-Level Education	Median Annual Pay, May 2022
Assemblers and Fabricators	Assemblers and fabricators build finished products and the parts that go into them.	High school diploma or equivalent	$37,930
Computer Programmers	Computer programmers write, modify, and test code and scripts that allow computer software and applications to function properly.	Bachelor's degree	$97,800
Industrial Machinery Mechanics, Machinery Maintenance Workers, and Millwrights	Industrial machinery mechanics, machinery maintenance workers, and millwrights install, maintain, and repair factory equipment and other industrial machinery.	High school diploma or equivalent	$59,470
Machinists and Tool and Die Makers	Machinists and tool and die makers set up and operate equipment to produce precision metal parts, instruments, and tools.	See How to Become One	$49,560
Painting and Coating Workers	Painting and coating workers apply finishes, often using machines, to a range of products.	See How to Become One	$43,370

Plating Machine Setters, Operators, and Tenders, Metal and Plastic

Metal or Plastic Machine Worker

What they do:

On the job, you would:

Important Qualities

Personality

Characteristics of this Career

Strengths

Values of the Work Environment

Aptitude

Abilities | Cognitive, Physical, Personality

Job Details

Attributes & Percentage of Time Spent

Tasks & Values

What Metal and Plastic Machine Workers Do

Duties

Work Environment

Injuries and Illnesses

Work Schedules

Getting Started

How to Become a Metal or Plastic Machine Worker

Education

Training

Licenses, Certifications, and Registrations

Advancement

Job Outlook

Employment

Contacts for More Information

Occupational Requirements Survey

Similar Occupations